The world's first high-tech compact fan with patented bionic Bionic Loop rotor comes from Germany. Developed with the support of the Federal Ministry of Economics and the bionic Dr. Rudolf Bannasch we provide with the NB-ELOOP series against the currently most advanced fans of the world.
The NB-ELOOP series sets new records in almost every category and convinced by our quality product. Newly developed warehouse and drive as well as the proven NB cable management and a 12-piece mounting for vibration-free mounting complete the unique overall setup.
Bionic Blade (New)
The new design eliminates the tip vortices are formed between the suction and pressure side of the wing tips. The tip vortices are here divided into smaller edge vortex and spread evenly. The resulting sheet at the trailing edge tip vortex can be reduced by vorticity guides to a minimum. The result is a significant improvement in glide ratio which results in a reduction of the aerodynamic flow induced noise and improves energy efficiency.
Dust-resistant super smooth surface, original material Bayer Makrolon ®.
Bionic chassis fan (New)
• Aerodynamically optimized Abströmfeld
• 4 resonance / interference absorber (Deep Sound Design)
• Increased Einströmfeld by cross-ply construction
• Super Linear power delivery across the entire rev range, flow-optimized
• Glass fiber reinforced PBT Materialmassierter frame UL94V0 30% GF
NB-EKA 2 Drive (New)
• Auto restart function for reliable starting.
• Integrated blocking and overload protection.
• NB-scalable Wide Range Electronics
• low start voltage
• rpm lead
• AntiDust technology (fully dust-protected motor)
NB-NanoSLI two magnetic bearings (New)
• Lageinvariante lubrication and noise reduction of vertical and horizontal operation without an increase in volume
• AntiDust technology (completely dust-proof bearings)
• nanotechnology with special lubrication for long life and low operating noise
NB cable management
Plug-sheathed cable, 1x 20cm + 50cm
Vibration-free mounting
The included 12-piece mounting kit enables vibration-free installation, which reduces the operating volume is mounted.
Specifications:
Dimensions: 120x120x25mm
Weight: 123g
Nominal voltage: 12V
Starting voltage: 5.4 Volts
Power consumption: 0.33 watts
Rated speed: 800 (+ / - 10%)
Pressure: 0.585 mmH2O
Airflow: 57.3 m3 / h
Volume: 7.83 dB / A
MTBF (25 ° C): 160 000 hours
Connector: 3 Pin Molex with rpm lead
Warranty: 6 years
Scope of supply:
1x Noiseblocker NB-B12-1 Bionic ELOOP 800rpm fan (120x120x25mm)
2x sheathed cable (20 + 50cm)
12-piece mounting for vibration-free mounting
Manufacturer:
NOISEBLOCKER
No posts found
As soon as the price of the products decreases, you will immediately know about it.
The price has not changed yet. We will show it on this chart once it changes
Instagram
2