Additional Recoil Kit to build in your AimTrak Light Gun, for real force feedback!

What the kit contains:
• Recoil solenoid
• Replacement trigger switch PCB with recoil driver
• Wiring to sensor module

What it does not contain:
• Power supply. You will need a power supply which can output 20-36 volts with a peak current capacity of 2 amps or greater. (4 amps would give optimum recoil power) The best type would be a simple unregulated unit although some laptop supplies output the required voltage/current and would be suitable. Old laptop supplies should be easy to find on Ebay.
• Wiring from power supply to the trigger PCB. Two wires are required, flexible insulated wire or 2 core light-duty power cable. The power supply may already have wiring attached.
You may want to encase this, and the USB cable in an arcade-style hose covering.
We now stock the recoil-compatible USB cable with power wires. This cable is only suitable for use with sensor modules having a 5-pin header, as used on the boxed guns.

You will also need:
• Basic soldering ablity and tools.
• Light oil