With the Alphacool Eisstation you get a compact expansion tank, which can be found in nearly every housing. The Eisstation is available in three versions: the DDC, D5/VPP or DC-LT version.

Highlights
1. The lid is made of high-strength nylon
2. Three versions for all common pumps
3. Versatile mounting options
4. Illuminated logo and LED mounting options

The Alphacool Eisstation Compartment is extremely compact and is available in three versions which are oriented to the desired pump. Available are a D5./VPP, a DDC and a variant for the DC-LT pump. The pumps are installed in the floor of the Eisstation and are not visible from the outside. The bottom of the Eisstation consists of a metal plate which increases the stability of the Eisstation.

Mounting options
There is the possibility to screw the Eisstation on a 2.5 "bracket for SSD hard disks. It is also possible to mount it in a 5.25 "slot. The screw connection is made in both cases using the enclosed decoupling screws. This minimizes the transmission of vibrations to the housing, and overall operation becomes significantly quieter. Another mounting option is an enclosed Velcro fastener. A part of the Velcro is simply glued to the bottom of the Eisstation while the other part is glued in the case. Then the Eisstation has only to be pressed with the ground on the counterpart in the housing. Due to the size of the Velcro fastener, a secure position is also ensured during transport. The assembly can be carried out vertically and horizontally, depending on the requirements and space.

Connection options
Each one IN and OUT with G1 / 4 threads can be found on the head with the illuminated logo. You can change the color of the logo with the optional Modding Kit. The cover has a G1 / 4 "and a G3 / 8" connector. The G3 / 8 "connector facilitates the filling of the Eisstation due to the larger diameter and can alternatively be used as an illumination module for 5 mm LEDs. Two additional 5 mm LED spots can also be found in the floor and illuminate the water-filled part from below.

A special highlight is the material selection of the Eisstation. The lower part is coated with a high-quality soft-touch surface which gives an outstanding feel and look. The upper part and the actual expansion tank is not made of simple and fast breaking Plexiglas but made of extremely stable nylon. While normal glass or plexiglass tanks can tear or break even at small falls or improper handling, it is almost impossible to destroy the transparent container of the Eisstation.

Technical specifications
Dimensions (LxWxH): 102 x 82 x 85mm
Material: Nylon / PMMA
In / Out: G1 / 4 "
Connectivity: 3x G1 / 4 "/ 1x G3 / 8"
Power supply LED logo: 3 pin
Lighting modules: 4x for 5mm LED

Delivery
1x Alphacool Eisstation DC-LT - Solo reservoir tank
1x metal mounting plate
D5 Pump attachment
Mounting screws
4x decoupling screws
Self-adhesive velcro